MoPoxY Polyamide/Epoxy: The MoPoxY epoxy coating system offers excellent protection in exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Convenient 1:1 mixing ratios. Heat resistant up to 200 degrees. (513-series)

MoPoxY HS Polyamide/ Epoxy: MoPoxY HS Coating is a high solids, low VOC coating offers excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Convenient 1:1 mixing ratios. Heat resistant up to 200 degrees. Convenient 1:1 mixing ratios. Heat resistant up to 250 degrees. Requires no induction time. (613-series)

MoPoxY HB High Build Epoxy Coating: This epoxy series offers excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. USDA approved for direct food contact surfaces and EPA approved for potable water tank lining. Meets AWWA d-102-78 inside system #1. (40-AW-13)

MoPox-Acryl Acrylic Epoxy Coating: Formulated for the marine industry as an alternative for hard-to-use polyurethane coatings. Excellent resistance to fresh and salt water. Low VOC at a ready to apply viscosity. Better application properties than 2-component polyurethanes. Good topcoat chemical resistance to areas subject to chemical splash, spills, and fumes. (41-AW-2)

MoPoxY Mastic Epoxy Coating: This mastic coating offers excellent protection in exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Very high solids. Low VOC. Heat resistant up to 200 degrees. (40-AW-32)

Back To Top
Epoxy Finishes

 

 

 

 

   

 

 

 

 

 

 

 

 

 

 

 

Mothane Acrylic Polyurethane Enamel: Mothane Polyurethane Enamel offers excellent protection in exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Temperature resistant up to 250 degrees. Excellent abrasion and moisture resistance.(72-series)

Mothane HD Acrylic Polyurethane Enamel: Our Mothane HD offers excellent protection in exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Temperature resistant up to 250 degrees. Excellent abrasion and moisture resistance.(72-series)

Mothane HS-900 Acrylic Polyurethane Enamel: Mothane HS-900 offers excellent protection in exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Temperature resistant up to 250 degrees. Excellent abrasion and moisture resistance.(72-series)

Mothane HS-1000 Acrylic Polyurethane Enamel: Our Mothane HS-1000 offers excellent protection in exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Temperature resistant up to 250 degrees. Excellent abrasion and moisture resistance.(72-series)

Mirrorthane Polyester Polyurethane Enamel: This polyurethane enamel offers excellent long term protection in exposures including mild industrial and marine environments. Excellent color and gloss retention and overall durability. When used with the recommended primer, offers outstanding protection from corrosion and weathering. Provides a high gloss, mirror-like finish. (51-series)

Back To Top

 

Polyurethane Finishes

 

   

 

 

 

 

 

 

 

 

 

 

 

 


uHeavy Duty Transportation Coatings (Truck, Railcar)
uHeavy Equipment Coatings
uStorage Tank Coatings (Exterior and Internal Linings)
uChemical Resistant Coatings
uTemperature Resistant Coatings
uOEM Coatings (Bake, Force Dry, Air Dry, High Solids, Water-based)
u"Effect" Finishes (Hammer, Texture, Metallic)
uPotable Water Tank Linings (NSF Approved)
uCoal Tar Epoxy Coatings
uNon-skid Epoxy Floor Coatings
uMilitary/Federal Specification Coatings

       

 

   

Specialty Products

 

 

 

 

 

 

 

Back To Top


 

 

 

Intermediate Coatings
Epoxy Primers/
MoPoxY Epoxy Primer Red: The MoPoxY epoxy coating system offers excellent protection in exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Convenient 1:1 mixing ratios. Heat resistant up to 200 degrees. (513-10)

MoPoxY HS Epoxy Primer: MoPoxY HS Coating is a high solids, low VOC coating offers excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Convenient 1:1 mixing ratios. Heat resistant up to 200 degrees. Convenient 1:1 mixing ratios. Heat resistant up to 250 degrees. Requires no induction time. (613-10)

MoPoxY HB High Build Epoxy Primer: Offers excellent protection in exposures including moderate to severe industrial and marine environments. Excellent resistance to fresh and salt water, detergents, and most chemicals. Very good resistance to fumes and spillage of most organic solvents, acids, and alkalies. Temperature resistant up to 200 degrees. Excellent abrasion and moisture resistance. (40-DR-5)

MoPoxY ST Epoxy Coating: Excellent resistance to fresh and salt water. Excellent abrasion resistance, and adhesion to tight rust. Good adhesion to damp surfaces. A direct metal coating that does not require grit blasting. Provides recoatability with excellent adhesion over a long period of time. Heat resistant up to 200 degrees. (41-BK-1)

MoPoxY IR Epoxy Coating: Excellent resistance to fresh and salt water. Excellent abrasion resistance, and adhesion to tight rust. Good adhesion to damp surfaces. A direct metal coating that does not require grit blasting. Provides recoatability with excellent adhesion over a long period of time. Heat resistant up to 200 degrees. (41-BK-14)

MoPoxY Prime Reconstruction Primer: Excellent resistance to corrosion from fresh and salt water. May be topcoated with a variety of generic coating systems. An excellent weld through primer. Excellent spray application properties with a long pot life. Dry to recoat in minutes with very good thin film rust inhibitive properties. (40-DR-12)